Activisys Limited
Company No: 05257511. Reg. Address: 47-49 Park Royal Road, London NW10 7LQ. Tel: +44 20 8090 0404. Fax: +44 20 8181 4578.
Meinberg Products:
The Meinberg LANTIME M900 Timeserver can be used all around the world to synchronize even the largest networks in computer centers, industrial network infrastructures and telecom environments. The M900 is Meinbergs system platform for customized solutions and offers a wide range of possible configurations, including a wealth of choices for time and frequency inputs and outputs as well as redundancy enhancements for fail-safe synchronization needs.
LANTIME M900 NTP Server :
NTP Timeserver Platform for Customized Time and Frequency Synchronization Systems
LANTIME M600/MRS : NTP Time Server synchronized by GPS/1PPS/10MHz/IRIG/NTP
Meinberg LANTIME time servers are used around the world to provide accurate time to networks of any size. The LANTIME M600/MRS synchronizes all systems that are NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio clock and supports a broad range of other reference time sources like 1PPS, 10MHz, IRIG time codes (both DCLS and AM) or upstream NTP servers. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception and can also be used as a stable independent time base when operated in free running mode.
LANTIME M600/GPS : High End NTP Time Server with integrated GPS radio clock
The Meinberg LANTIME time server is used around the world to provide accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio clock as its reference time source. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception. The standard M600 model already offers a broad range of interfaces and can be customized to meet the special requirements of your application.
LANTIME M600/GPS/PTP :
PTPv2 / IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock
The Meinberg LANTIME time server is used around the world to provide accurate time to networks of any size. It synchronizes all PTPv2 / IEEE 1588-2008 compatible clients and systems either NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio clock as its reference time source. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception.
LANTIME M300/GPS : NTP Time Server with integrated GPS radio clock
The Meinberg LANTIME time server is used around the world to provide accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio clock as its reference time source. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception.
LANTIME M200/GPS : Network Time Server with integrated GPS Reference Clock
LANTIME M200 time servers can be installed to provide accurate time to small and medium sized computer networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a built-in Meinberg GPS radio clock as its primary reference time source. A stable and precise oscillator is capable of bridging interferences or a temporary loss of reception.
LANTIME M100/GPS : NTP Time Server with GPS Reference Clock for DIN Rail Installations
LANTIME M100 time servers can be installed to provide accurate time to small and medium sized computer networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a built-in Meinberg GPS radio clock as its primary reference time source. A stable and precise oscillator is capable of bridging interferences or a temporary loss of reception. Its compact form factor offers an ideal solution to network time synchronization needs in industrial and power generation/distribution networks.
Time Server...
LANTIME/GPS/xHS : NTP Time Server with integrated GPS radio clock in railmount housing
The compact Meinberg LANTIME/GPS/AHS time server is used around the world to provide accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio clock as its reference time source. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception..
LANTIME M300/PZF : DCF Time Server with integrated DCF77 radio clock
The Meinberg LANTIME/M300PZF DCF 77 time server is used all over Europe to provide accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in Meinberg DCF77 radio clock with correlation receiver as its reference time source. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception.
LANTIME M200/PZF : NTP Time Server with integrated DCF77 Reference Clock
LANTIME M200 time servers can be installed to provide accurate time to small and medium sized computer networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a built-in Meinberg PZF radio clock as its primary reference time source. The PZF receiver decodes the DCF77 long wave radio signal and the included stable and precise oscillator is capable of bridging interferences or a temporary loss of reception.
LANTIME M300/MSF : NTP Time Server with integrated MSF radio clock
The Meinberg LANTIME M300/MSF time server can be used in large parts of Europe to provide accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in Meinberg MSF radio clock with correlation receiver as its reference time source
LANTIME M300/TCR : IRIG Time Server with Time Code Receiver
The Meinberg LANTIME M300/TCR IRIG time server provides accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and comes with a built-in Meinberg TCR module which decodes a IRIG/AFNOR signal from any compatible time code generator. A highly stable and precise oscillator is capable of bridging failures or a temporary loss of the IRIG signal.
LANTIME M900 NTP Server :
NTP Timeserver Platform for Customized Time and Frequency Synchronization Systems
The Meinberg LANTIME M900 Timeserver can be used all around the world to synchronize even the largest networks in computer centers, industrial network infrastructures and telecom environments. The M900 is Meinbergs system platform for customized solutions and offers a wide range of possible configurations, including a wealth of choices for time and frequency inputs and outputs as well as redundancy enhancements for fail-safe synchronization needs.
LANTIME M600/MRS : NTP Time Server synchronized by GPS/1PPS/10MHz/IRIG/NTP
Meinberg LANTIME time servers are used around the world to provide accurate time to networks of any size. The LANTIME M600/MRS synchronizes all systems that are NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio clock and supports a broad range of other reference time sources like 1PPS, 10MHz, IRIG time codes (both DCLS and AM) or upstream NTP servers. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception and can also be used as a stable independent time base when operated in free running mode.
LANTIME M300/MRS : NTP Time Server synchronized by GPS/1PPS/10MHz/IRIG/NTP
The LANTIME M300/MRS (Multi Reference Source) NTP time server supports a broad range of reference time sources like GPS, 1PPS, 10MHz, IRIG time codes (both DCLS and AM) or upstream NTP servers. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception. In totally isolated networks without any available external reference signal, the MRS utilizes its OCXO HQ to maintain a stable time base. The time can therefore be manually set during initial configuration.
LANTIME M300/RDT : NTP Time Server
The Meinberg LANTIME M300/RDT time server provides accurate time to networks of any size. It synchronizes all systems either NTP- or SNTP-compatible and itself is synchronized by any external Meinberg radio clock (Stratum 1 mode) or up to 7 external NTP time servers (Stratum 2 mode).
LANTIME M600/GPS/PTP :
PTPv2 / IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock
The Meinberg LANTIME time server is used around the world to provide accurate time to networks of any size. It synchronizes all PTPv2 / IEEE 1588-2008 compatible clients and systems either NTP- or SNTP-compatible and uses a built-in Meinberg GPS radio clock as its reference time source. A highly stable and precise oscillator is capable of bridging interferences or a temporary loss of reception.
